ComNet CNFE3TX2CXMSU 1 SIM Cellular, Ethernet Modem/Wireless Router

Manufacturer: ACRE
Mfr. Part: CNFE3TX2CXMSE

4G - LTE 1900, LTE 1700, LTE 850, LTE 700 - LTE, HSUPA, HSDPA, EDGE, GPRS(2 x External) - 1 x Network Port - 1 x Broadband Port - PoE Ports - Fast Ethernet - VPN Supported - Wall Mountable, DIN Rail Mountable

ComNet CNFE3TX2CXMSU 1 SIM Cellular, Ethernet Modem/Wireless Router

About This Product

Overview

The ComNet CNFE3TX2CXMS(U,E) is an edge Cellular VPN Gateway with 2 10/100TX Ports (1 × LAN, 1 × WAN) and 1 standard SIM card slot. It supports 802.1X and MAC filter for security control. The Gateway can be configured to operate in 3 modes: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. The units can be powered by an IEEE 802.3af PoE compliant device on port 1 or through the 4-Pin terminal block with dual DC Inputs. The Gateways are DIN Rail mountable and feature a rigid IP-30 housing.

FEATURES
  • Supports 802.1X Authentication
  • HTTPS Support for Secure Management
  • 4G LTE Modem Built In
  • OpenVPN, IPsec VPN, PPTP VPN
  • NAT Support (Virtual Server, Port Trigger, DMZ and UPnP)
  • 1KV Isolation for PoE PD Port
  • DIN-Rail and Wall Mountable
  • Event Warning by Syslog, Email and SNMP Trap
  • Cellular Antennas included
  • Certified for AT&T Networks
APPLICATIONS
  • Remote locations where network access is required
  • Wireless Perimeter Surveillance
  • Temporary Network Surveillance Deployments
  • Site to Site VPN
  • Redundant Gateway
  • Electrical substation SCADA and distribution automation networks; protective relaying systems; power transmission & distribution systems; remote/unattended wind farm, hydroelectric, and solar/photovoltaic power generation facilities; and other electrical utility-specific applications
  • NERC-CIP-014 compliance for perimeter security, surveillance monitoring, and controlled access to electrical substations and power generating facilities, and other critical infrastructure/high value, mission-critical sites and assets
  • Industrial/Factory Automation & Process Control SCADA Networks
  • Distribution Automation: Remote status indication, monitoring, and control of reclosers, capacitor banks, voltage regulators, and other remotely-located electrical utilityspecific equipment, via the internal cellular radio link
  • Integrated IP-Video, VOIP, and Data Transmission Networks
  • Wastewater treatment plants, and suppliers of potable drinking water
  • ITS/transportation closed-loop signalization and VMS/VDS/ surveillance/incident detection systems
  • City Center security and surveillance monitoring
  • Military, defense, and government communications networks
  • No need to separate hardware from your service provider, enjoy fast Wi-Fi speed and save space
  • Featuring Fast Ethernet port to speed up the transfer rate up to 100Mb/sec to connect your wired network
  • Electrical power and data are transmitted using a single cable to devices such as Access Points, IP cameras or IP phones
  • Wall mounting feature - Conveniently install the router while keeping the wires and cables organized

Quick Specifications

Product Model
CNFE3TX2CXMSU
Product Type
Modem/Wireless Router
Broadband Transmission Technology
Cellular Ethernet
Cellular Generation
4G
Cellular Network Supported
LTE 1900 LTE 1700 LTE 850 LTE 700
Cellular Data Connectivity Technology
LTE HSUPA HSDPA EDGE GPRS
Number of External Antennas
2
Number of Network (RJ-45) Ports
1