Omnitron Systems OmniConverter 2020-00-09W Transceiver/Media Converter

OmniConverter Single Pair Power over Ethernet | 10Mbps 10BASE-T to 10BASE-T1L Converters

The OmniConverter Single Pair Power over Ethernet converters are IEEE 802.3cg compliant products that function as PoE injectors and Powered Devices. They convert 10BASE-T Ethernet to single-pair 10BASE-T1L Ethernet. They use single-pair Ethernet cabling (SPE) to extend the Ethernet link distance up to 1km.

The Single Pair Power over Ethernet converters feature one IEEE 802.3cg compliant 10BASE-T1L terminal or IEC 63171-2 SPE port and one 10BASE-T RJ-45 port supporting 10Mbps full-duplex data rates.

The 10T/LPDS models feature an additional 2-pin terminal connector providing a DC output voltage of 12 or 24 volts to power low voltage devices.

The Single Pair Power over Ethernet converters achieve seamless Ethernet connectivity to IEEE 802.3cg compliant devices, such as field transmitters, building controllers or cameras. Bookend configurations support end-to-end Ethernet connectivity supporting a variety of powering options.

They are available as a standalone unit with or without integrated mounting brackets. They can be DIN-rail mounted using the optional DIN-rail mounting clip kit (8252-0). Models are available with an external 100 to 240VAC power adapter or with a 2-Pin DC terminal connector.

APPLICATION EXAMPLES | Building Automation Application

This example shows a Building Automation application using a combination of OmniConverter 10TPD/LPS and 10TPS/LPD to connect building systems back to a centralized control room. No external AC power is required for the modules since the 10TPD/LPS modules are powered by the GPoE+/M PoE+ switch and the 10TPS/LPD modules are powered over the SPE cable. Each building system is powered by PoE/PoE+ from the OmniConverter 10TPS/LPD modules. Systems controlled by the OmniConverter modules include Fire Alarm, Lighting, Elevator Control, Access Control to Floors, Security Surveillance and HVAC.

Extend Ethernet and Power up to 1200 meters using PD and SPoE Devices

In this example, the OmniConverter 10TPD/LPS is receiving power from a PoE+ Ethernet switch and delivering power (SPoE) across a SPE cabling to an OmniConverter 10TPS/LPD. The OmniConverter 10TPS/LPD is powering a IEEE 802.3at camera up to 100 meters in distance.

Extend Ethernet and power up to 1200 meters to a non PoE device

In this example, the OmniConverter 10T/LPS is delivering power (SPoE) across a SPE cabling to an OmniConverter 10T/LPDS. The 10T/LPDS is powering a Wi-fi access point using the 12V or 24V DC power out of the 10T/LPDS device splitter power port. This is useful when no external power is available at the far end.