Perle INJ 1100-T PoE Injector
24 V DC, 48 V DC Input - 54 V DC Output - 75 W - Gray
About This Product
Overview
INJ 1100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliantpower over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side.
Generating up to 60 Watts, the INJ 1100-T provides electrical power to remote PD access points,pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).
With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.
- 10/100/1000 Mbps
- Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices
- Provide 4 to 60 Watts of PoE power
- IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant
- Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3
- Extended supply voltage range of 18 V DC ... 57 V DC, redundant
- Safe shield connection to ground potential
- Optional Extended temperature range of -40°C to +75°C
- Electrical isolation of the internal power supply unit
Quick Specifications
- Product Series
- INJ
- Product Model
- INJ 1100-T
- Product Type
- PoE Injector
- Protection Type
- Short Circuit Over Current
- Input Voltage
- 24 V DC 48 V DC
- Maximum Output Voltage
- 54 V DC
- Maximum Input Current
- 4.20 A
- Maximum Output Power
- 75 W