Server Technology Smart POPS 48-Outlets PDU
Monitored - IEC 60309 3P+G 9Hr 60A - 30 x IEC 60320 C13, 18 x CX - 230 V AC - Network (RJ-45) - Rack-mountable, Cabinet-mountable
About This Product
Overview
The Server Technology® PRO2 Smart POPS PDU provides local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® and POPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Smart POPS "Primary" PDU can be connected to as many as three (with optional module) PRO2 Smart POPS "Link" PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.
- HDOT Cx Outlets:
- Cx is the future-ready UL tested hybrid of a C13 and C19 outlet accommodating both C14 and C20 plugs.
- Network Monitoring:
- Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.
- Hot-Swap Network Card:
- Network access is ensured when power is lost to the Primary unit with backup power provided by the Linked unit.
- Star Multi-Linking
- : PRO2 provides the ability to link up to four power circuits using one IP address. Primary Expansion PDU provides backup power to network card.
- Temperature/Humidity Monitoring:
- Primary and Expansion (select products) units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications.
- IP Access , Security & Communications
- : Web, SSH, Telnet, SNMPv2c & v3, RS-232 serial, 10/100 Base T-Ethernet, LDAP(S), TACACS+, RADIUS, DHCP, & SMTP/email.
- Auto-Flip Current Display:
- Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in highdensity cabinets.
- Per-Inlet Power Sensing:
- PIPS® (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet.
- Per-Outlet Power Sensing
- : POPS® (Per Outlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, and Energy per outlet.
- Branch Current Monitoring
- : Monitors current at each breaker branch and provides SNMPbased alerts and emails on high usage that risks a tripped circuit.
Quick Specifications
- Product Line
- Smart POPS
- Product Type
- PDU
- PDU Type
- Monitored
- Phase
- Three Phase
- Plug/Connector Type
- IEC 60309 3P+G 9Hr 60A
- Receptacle Type
- IEC 60320 C13 CX
- Receptacle Detail
- 30 x IEC 60320 C13 18 x CX
- Protection Type
- Branch Circuit Circuit Protection Circuit Breaker Fuse